Heavy Duty Slurry Pumps: Comparing Two HWN Dredge Pump Options

Heavy Duty Slurry Pumps: Comparing Two HWN Dredge Pump Options

  • Home
  • News
  • Heavy Duty Slurry Pumps: Comparing Two HWN Dredge Pump Options
2026.11.19
TECHNICAL NOTECOMPARISON

Key data

Model range, casing and structure
Maximum flowrate, head and efficiency
Maximum particle size and material hardness
Lubrication and connection mode

Abstract

The two HWN dredge pump options share the same model range, casing structure, capacity limits, materials, lubrication and connection modes. Compare the common specifications against your required flow, head, solids size and drive arrangement before requesting a configuration.

Illustration: Heavy Duty Slurry Pumps: HWN Series Options Compared for Dredging
Illustration for reference; see the product page for actual photos and specifications.
§1

Shared HWN construction and range

Both heavy duty slurry pumps use a horizontal cantilever structure and cover models from 200HWN to 1200HWN. The 200HWN to 500HWN models use a single-pump casing, while the 600HWN to 1200HWN models use a double-pump casing.

Each pump is a single-stage, single-suction design. Connection modes are a built-in bracket and an integrated gearbox, so your interface choice should follow the support and drive arrangement in the dredging system.

§2

Capacity and solids handling

The two options have the same capacity figures: maximum flowrate up to 9000 m³/h, maximum head up to 80 m, and an efficiency range of 60% - 85%. Both handle a maximum particle size up to 220 mm.

CriterionHighPerformance HWN Series Dredge PumpHWN Series Dredge Pump
Model range200HWN - 1200HWN200HWN - 1200HWN
StructureSingle/Double Casing CantileverSingle/Double Casing Cantilever
Max flowrateUp to 9000 m³/hUp to 9000 m³/h
Max headUp to 80 mUp to 80 m
Efficiency range60% - 85%60% - 85%
Max particle sizeUp to 220 mmUp to 220 mm

Use your required flowrate, head and particle size to narrow the model range. The pump speed or impeller diameter can be adjusted to tailor output performance for site needs, while the final operating point must remain suitable for the system.

§3

Wear, lubrication and connections

Both options use anti-wear alloy with material hardness of ≥ 50 HRC. Both use oil or grease lubrication and provide the same two connection modes: built-in bracket or integrated gearbox.

CriterionHighPerformance HWN Series Dredge PumpHWN Series Dredge Pump
Casing designSingle-stage Single-suctionSingle-stage Single-suction
LubricationOil or Grease LubricationOil or Grease Lubrication
Material hardness≥ 50 HRC (Anti-wear Alloy)≥ 50 HRC (Anti-wear Alloy)
Connection modeBuilt-in Bracket / Integrated GearboxBuilt-in Bracket / Integrated Gearbox

Choose the option whose model, drive interface and lubrication arrangement fit the dredging system. You can review the HWN Series Dredge Pump alongside your required flow, head, particle size and connection details.

Which one suits whom

The HighPerformance HWN Series Dredge Pump suits dredging buyers checking capacity, abrasive-solids handling and drive interfaces. The HWN Series Dredge Pump suits buyers comparing the same operating and maintenance requirements; choose between them after matching the required model, site interface and lubrication arrangement.

The two options

HighPerformance HWN Series Dredge PumpHWN Series Dredge Pump

Which option fits your purchase review?

The two options suit dredging projects that need a horizontal cantilever pump for abrasive solids within the stated particle-size, flowrate and head limits. Since the shared specifications do not separate them on these criteria, base the purchase review on the required HWN model, drive arrangement, lubrication method and site interface. Send those operating and connection details with your inquiry so the requested configuration can be checked against your system.

The company

Hihorn Pump Co., Ltd

Hihorn Pump Co., Ltd was established in 2023 with a registered capital of 50 million RMB. Our factory is located in Jingxing economic development zone, Shijiazhuang city, Hebei Province. We are a modern enterprise integrating R&D, production and sales of slurry pumps and wear parts. Our factory covers an area of 16317 square meters and a total construction area of 9,300 square meters.…

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.