Key data
Abstract
The two HWN dredge pump options share the same model range, casing structure, capacity limits, materials, lubrication and connection modes. Compare the common specifications against your required flow, head, solids size and drive arrangement before requesting a configuration.
Shared HWN construction and range
Both heavy duty slurry pumps use a horizontal cantilever structure and cover models from 200HWN to 1200HWN. The 200HWN to 500HWN models use a single-pump casing, while the 600HWN to 1200HWN models use a double-pump casing.
Each pump is a single-stage, single-suction design. Connection modes are a built-in bracket and an integrated gearbox, so your interface choice should follow the support and drive arrangement in the dredging system.
Capacity and solids handling
The two options have the same capacity figures: maximum flowrate up to 9000 m³/h, maximum head up to 80 m, and an efficiency range of 60% - 85%. Both handle a maximum particle size up to 220 mm.
| Criterion | HighPerformance HWN Series Dredge Pump | HWN Series Dredge Pump |
|---|---|---|
| Model range | 200HWN - 1200HWN | 200HWN - 1200HWN |
| Structure | Single/Double Casing Cantilever | Single/Double Casing Cantilever |
| Max flowrate | Up to 9000 m³/h | Up to 9000 m³/h |
| Max head | Up to 80 m | Up to 80 m |
| Efficiency range | 60% - 85% | 60% - 85% |
| Max particle size | Up to 220 mm | Up to 220 mm |
Use your required flowrate, head and particle size to narrow the model range. The pump speed or impeller diameter can be adjusted to tailor output performance for site needs, while the final operating point must remain suitable for the system.
Wear, lubrication and connections
Both options use anti-wear alloy with material hardness of ≥ 50 HRC. Both use oil or grease lubrication and provide the same two connection modes: built-in bracket or integrated gearbox.
| Criterion | HighPerformance HWN Series Dredge Pump | HWN Series Dredge Pump |
|---|---|---|
| Casing design | Single-stage Single-suction | Single-stage Single-suction |
| Lubrication | Oil or Grease Lubrication | Oil or Grease Lubrication |
| Material hardness | ≥ 50 HRC (Anti-wear Alloy) | ≥ 50 HRC (Anti-wear Alloy) |
| Connection mode | Built-in Bracket / Integrated Gearbox | Built-in Bracket / Integrated Gearbox |
Choose the option whose model, drive interface and lubrication arrangement fit the dredging system. You can review the HWN Series Dredge Pump alongside your required flow, head, particle size and connection details.
Which one suits whom
The HighPerformance HWN Series Dredge Pump suits dredging buyers checking capacity, abrasive-solids handling and drive interfaces. The HWN Series Dredge Pump suits buyers comparing the same operating and maintenance requirements; choose between them after matching the required model, site interface and lubrication arrangement.
The two options
Which option fits your purchase review?
The two options suit dredging projects that need a horizontal cantilever pump for abrasive solids within the stated particle-size, flowrate and head limits. Since the shared specifications do not separate them on these criteria, base the purchase review on the required HWN model, drive arrangement, lubrication method and site interface. Send those operating and connection details with your inquiry so the requested configuration can be checked against your system.
The company
Hihorn Pump Co., Ltd
Hihorn Pump Co., Ltd was established in 2023 with a registered capital of 50 million RMB. Our factory is located in Jingxing economic development zone, Shijiazhuang city, Hebei Province. We are a modern enterprise integrating R&D, production and sales of slurry pumps and wear parts. Our factory covers an area of 16317 square meters and a total construction area of 9,300 square meters.…
About Us ↗Visit company website ↗





