China Industrial Slurry Pump Manufacturer: Match HZ Series to Your Process

China Industrial Slurry Pump Manufacturer: Match HZ Series to Your Process

  • Home
  • News
  • China Industrial Slurry Pump Manufacturer: Match HZ Series to Your Process
2026.11.10

Selecting an industrial slurry pump starts with the slurry, required flow, head, pipe connection and plant layout. Our HZ and HZD Series covers 6.5 to 3500 m³/h, discharge diameters from 20 to 350 mm and heads up to 150 m. Single-case and Double-case configurations, plus alloy choices for abrasive or corrosive duties, help you specify a pump that fits the process and installation.

Illustration: China Industrial Slurry Pump Manufacturer: Match HZ Series to Your Process
Illustration for reference; see the product page for actual photos and specifications.
01

Required flow rate, discharge head and discharge diameter must fit the HZ and HZD Series range of 6.5 to 3500 m³/h, up to 150 m head and 20 to 350 mm discharge diameter.

02

Slurry condition and plant layout determine the material and construction choice: HA05, HA07 and HA61 address core wear duties, HA49 and HA51 address corrosive conditions, and Double-case construction provides eight discharge directions at 45-degree intervals.

Start with the slurry and duty point

As a China industrial slurry pump Manufacturer, we design the HZ and HZD Series for high-concentration abrasive slurry in coal, power, metallurgy and mineral processing. For a practical selection, define the required flow rate, discharge head, slurry chemistry and available pipe connection before choosing a size. The range covers 6.5 to 3500 m³/h, a maximum head of 150 m, and discharge diameters from 20 to 350 mm.

These limits give you a first screening method. A small process transfer line may sit toward the lower end of the flow and discharge range, while a large mineral-processing circuit may need a higher-capacity model. Send the actual flow and head point to us so we can match the pump selection to the duty instead of choosing by pipe diameter alone.

Match materials to wear and chemistry

High-chromium wear-resistant alloys are the starting point for abrasive service. The core material choices include HA05, HA07 and HA61. These grades are intended for slurry duties where solid particles create wear through abrasion and impact.

Chemistry adds a second selection condition. HA49 and HA51 are available as corrosion-resistant material choices for low-pH and highly corrosive working conditions. HA05 has a pH range of 5 to 12. This makes the slurry sample, concentration and pH important details for the quotation. Picture a mineral-processing line carrying abrasive slurry with a measurable acidic condition: the wear requirement and the chemical requirement must be considered together before selecting the wet-end materials.

We recommend the HZ Series for applications where abrasive solids are the main concern and the process falls within the stated flow, head and connection range. Ask us to review HA49 or HA51 when the process chemistry calls for corrosion protection. The material decision should follow the slurry condition, not the application name alone.

Decide between Single-case and Double-case construction

Both Single-case and Double-case configurations are available. The right choice depends on the plant layout and the way you need to integrate the pump into the pipeline.

A Double-case model uses a vertical mid-open structure and provides eight discharge directions at 45-degree intervals. This is useful when an existing pipeline, limited foundation space or a fixed discharge route makes alignment difficult. Before ordering, sketch the inlet and outlet centerlines, note the required discharge direction, and compare them with the eight available positions.

The Single-case configuration suits a layout where the planned discharge direction is already clear and the pump arrangement does not require the Double-case positioning flexibility. We can review the pipe route and configuration together when you send the connection orientation and installation drawing.

Check integration before ordering

Integration begins with the discharge diameter, duty point and discharge direction. The diameter range is 20 to 350 mm, while the flow range is 6.5 to 3500 m³/h and maximum head is 150 m. These values should be reviewed as one set because a matching diameter alone does not establish the correct hydraulic selection.

For an existing plant, measure the pipeline connection and record the required centerline arrangement. If you are replacing a pump, send the current pump size, operating flow, head requirement and slurry description. For a new line, provide the process flow, elevation or pressure requirement, solids condition and available layout space. We use those details to determine whether a Single-case or Double-case HZ Series pump is the suitable starting point.

The HZ Series is a fit for coal, power, metallurgy and mineral-processing duties involving abrasive, high-concentration slurry. We do not recommend selecting it from the industry label alone. The actual slurry, duty point and pipe arrangement decide whether the available range fits your process.

Questions that affect the selection

What flow range can the HZ Series cover?

The HZ and HZD Series covers 6.5 to 3500 m³/h. That span supports both lower-flow transfer duties and larger process circuits, provided the required head, discharge diameter and slurry condition also fit the selected model. Send us the normal flow rate and any peak flow requirement so we can assess the appropriate point within the range.

Which material should be considered for low-pH slurry?

HA49 and HA51 are the corrosion-resistant material choices for low-pH and highly corrosive working conditions. HA05 has a stated pH range of 5 to 12. Give us the slurry pH and chemistry with your request so the material choice reflects the actual process condition and the abrasive duty.

When is the Double-case arrangement useful?

Choose the Double-case arrangement when the discharge route needs layout flexibility. Its vertical mid-open structure allows the discharge port to be positioned in eight directions at 45-degree intervals. This can help when you are connecting the pump to an existing pipeline with a fixed route. Include a simple layout drawing with the required outlet direction.

What discharge sizes are available?

The stated discharge diameter range is 20 to 350 mm. Use the existing pipe connection as one input, then pair it with the required flow, head and slurry condition. A connection measurement by itself does not identify the correct pump size. Send the pipe diameter and operating duty together for a proper selection review.

Send the duty point with your inquiry

The Industrial HZ Series Slurry Pump suits abrasive, high-concentration slurry duties when its flow, head, diameter, material and layout requirements match your plant. Send the required flow, head, discharge diameter, slurry pH, solids description and a pipe-layout drawing to Hihorn Pump Co., Ltd for a quotation review.

The company

Hihorn Pump Co., Ltd

Hihorn Pump Co., Ltd was established in 2023 with a registered capital of 50 million RMB. Our factory is located in Jingxing economic development zone, Shijiazhuang city, Hebei Province. We are a modern enterprise integrating R&D, production and sales of slurry pumps and wear parts. Our factory covers an area of 16317 square meters and a total construction area of 9,300 square meters.…

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.